Poulvac IBMM + ARK Lyophilisate for Oculonasal Suspension for Chickens

This vaccine has been used in most types of spray equipment handsprayers (e.g. ASL
Polyspray 2), knapsack sprayers (e.g. Birchmeyer with 0.55 or 1.6 mm spray nozzle,
Gloria with 1.0 mm nozzle) or automatic spraying equipment (e.g. Bimex). The
apparatus should be set to deliver a coarse spray (droplet size of 80-160 micrometres),
allowing a dose of 0.5 ml per bird.
The lyophilised vaccine should be reconstituted with water of good quality at room
temperature e.g. deionised water or good quality drinking water.
The lyophilised vaccine should be reconstituted as follows:
Remove the aluminium cap from the vial. To reconstitute the lyophilised vaccine, the
rubber stopper should be removed whilst the vial is immersed in a plastic measuring jug
containing 0.5 litre of clean cool water.
Half fill the vial with water, replace the stopper and shake to remove any remnants in the
vial.
The content of the vial should then be added to the water in the jug, mixed well and
transferred to the sprayer tank and thoroughly mixed. For the 5,000 dose vial a total
amount of 2.5 l water is required and for the 10,000 dose vial a total amount of 5 l water
should be used.
The chickens should be sprayed in chick boxes or brooding rings in the house to avoid
loss of vaccine virus.
Upon reconstitution, transparent to white opaque suspension (depending on the
volume of water used).